Figure 3-12: chassis support screws – IEI Integration UPC-V315-QM77 User Manual

Page 40

UP C-V315-QM77 P a n e l P C

P a g e 29

S te p 6:

Insert the four monitor mounting screws provided in the wall mounting kit into the

four screw holes on the real panel of the flat panel PC and tighten until the screw

shank is secured against the rear panel (Figure 3-12).

S te p 7:

Align the mounting screws on the monitor rear panel with the mounting holes on

the bracket.

S te p 8:

Carefully insert the screws through the holes and gently pull the monitor

downwards until the monitor rests securely in the slotted holes (Figure 3-12).

Ensure that all four of the mounting screws fit snuggly into their respective

slotted holes.

Figure 3-12: Chassis Support Screws

NOTE:

In the diagram below the bracket is already installed on the wall.