IEI Integration UPC-V315-QM77 - Manual (Page 36)

UP C-V315-QM77 P a n e l P C
P a g e 25
3.6 Mo u n tin g th e S ys te m
WARNING:
When mounting the panel PC onto an arm or onto the wall, it is better
to have more than one person to help with the installation to make sure
the panel PC does not fall down and get damaged.
The panel PC is VESA (Video Electronics Standards Association) compliant and can be
mounted on an arm, a stand or a bracket with a 100 mm/75 mm interface pad. M8 and M4
mounting screws can both be used for VESA mount. The VESA mount retention screw
holes of the UPC-V315-QM77 are shown in Figure 3-7.
Figure 3-7: VESA Mount Retention Screw Holes
To enhance the stability, the user can use the mounting brackets, which are shipped with
the UPC-V315-QM77 and can be attached on both side panels. An additional mounting
device is required for the mounting brackets.