12 usb connectors – IEI Integration UPC-V315-QM77 User Manual
Page 51
UP C-V315-QM77 P a n e l P C
P a g e 40
S te p 5:
Locate the RJ-45 RS-422/485 connector. The location of the RJ-45
RS-422/485 connector is shown in Figure 1-4.
S te p 6:
Insert the RJ-45 connector. Insert the RJ-45 connector on the
RJ-45 to DB-9
COM port cable to the RJ-45 RS-422/485 connector on the UPC-V315-QM77.
Figure 3-32: RJ-45 RS-422/485 Serial Device Connection
S te p 7:
Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the RJ-45 to DB-9 COM port cable.
S te p 8:
Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
3.7.12 US B Co n n e c to rs
The USB ports are for attaching USB peripheral devices to the system. To install a USB
device, follow the steps below.
S te p 1:
Locate the USB connectors. The locations of the USB connectors are shown
in Figure 1-4.
S te p 2:
Align the connectors. Align the USB device connector with one of the
connectors. See Figure 3-33.