Figure 3-35: vga connector – IEI Integration UPC-V315-QM77 User Manual

Page 54

UP C-V315-QM77 P a n e l P C

P a g e 43

S te p 1:

Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Figure 1-4.

S te p 2:

Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

S te p 3:

Insert the VGA connector

Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

UPC-V315-QM77. See Figure 3-35.

Figure 3-35: VGA Connector

CAUTION:

It is suggested that not to open the rear cover and replace any

components. If the components fail, it must be shipped back to IEI to

be replaced. If the system has failed, please contact the system

vendor, reseller or an IEI sales person directly.