1 unpacking, Npacking, 1 un pa c kin g – IEI Integration UPC-V315-QM77 User Manual

Page 27

UP C-V315-QM77 P a n e l P C

P a g e 16

2.1 Un pa c kin g

To unpack the panel PC, follow the steps below:

WARNING!

The front side LCD screen has a protective plastic cover stuck to the

screen. Only remove the plastic cover after the panel PC has been properly

installed. This ensures the screen is protected during the installation

process.

S te p 1:

Use box cutters, a knife or a sharp pair of scissors that seals the top side of the

external (second) box.

S te p 2:

Open the external (second) box.

S te p 3:

Use box cutters, a knife or a sharp pair of scissors that seals the top side of the

internal (first) box.

S te p 4:

Lift the monitor out of the boxes.

S te p 5:

Remove both polystyrene ends, one from each side.

S te p 6:

Pull the plastic cover off the panel PC.

S te p 7:

Make sure all the components listed in the packing list are present.

S te p 0: