8 power input, 3-pin terminal block, 9 power input, 4-pin din connector, Figure 3-25: 3-pin terminal block pinouts – IEI Integration UPC-V315-QM77 User Manual
Page 47: Table 3-2: lan pinouts, Table 3-3: rj-45 ethernet connector leds, 8 p o we r in p u t, 3-p in te rm in a l blo c k
UP C-V315-QM77 P a n e l P C
P a g e 36
The pinouts of the RJ-45 LAN connector is shown below.
Pin
Description
Pin
Description
1
MDI0+
2
MDI0-
3
MDI1+
4
MDI1-
5
MDI2+
6
MDI2-
7
MDI3+
8
MDI3-
Table 3-2: LAN Pinouts
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. See
LED
Description
LED
Description
A
on: linked
blinking: data is being sent/received
B
off: 10 Mb/s
green: 100 Mb/s
orange: 1000 Mb/s
Table 3-3: RJ-45 Ethernet Connector LEDs
3.7.8 P o we r In p u t, 3-p in Te rm in a l Blo c k
The power connector connects the leads of a 9V~36V DC power supply into the terminal
block. Make sure that the power and ground wires are attached to the correct sockets of
the connector.
Figure 3-25: 3-pin Terminal Block Pinouts
3.7.9 P o we r In p u t, 4-p in DIN Co n n e c to r
The power connector connects to the 10.5 V ~ 36 V DC power adapter.