Adaptec ANA-5940 - Manual (Page 96)

8-6
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C
Page: 8-6
Print Spec Number: 493081-00
Current Date: 5/28/97
ECN Date: 05/29/97
5 Save and exit the file.
Automatically Loading the ATM Driver
To automatically load the Adaptec ATM driver at system boot, you
must modify your autoexec.ncf file as follows:
1 Type the following command at the system prompt, and press
Enter
:
load edit
2 In the File Edit screen, type the following command at the
system prompt and press Enter:
sys:\system\autoexec.ncf
The File SYS:\SYSTEM\AUTOEXEC.NCF screen appears.
1 47007900000000000000000000
2 00a03e00000100
les_nw Network
NSAP; up
to 26
characters Specifies the first 13-byte
network portion of the
NSAP address for the
LES. This value is
required if
LES_REQ=yes.
les_esi ESI
NSAP; up
to 14
characters Specifies the last 7-byte
end system identifier
(ESI) portion of the NSAP
address for the LES. This
value is required if
LES_REQ=yes.
lecs_nw
1
Well-
known
LECS
address
Network
NSAP; up
to 26
characters Specifies the first 13-byte
network portion of the
NSAP address for the
LECS.
lecs_esi
2
Well-
known
LECS
address
ESI
NSAP; up
to 14
characters Specifies the last 7-byte
ESI portion of the NSAP
address for the LECS.
elan_name default Up to 25
characters Specifies the ELAN name
for the LES.
Parameter
Default
Value Possible
Values
Description