Adaptec ANA-5940 - Manual (Page 30)

3-4
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C
Page: 3-4
Print Spec Number: 493081-00
Current Date: 5/28/97
ECN Date: 05/29/97
Connecting the ANA-5910/5930/5940 Adapter to
the Network
Before you can use your ANA-5910/5930/5940 adapter, you must
connect it to an ATM switch.
Connecting to the ANA-5910
Note: The RJ-45 connector pinout on the adapter conforms
with the IBM de facto standard. If your switch connector
pinout is not compatible with this standard, obtain or create
a cable to convert to the required pinout.
To connect the ANA-5910 to an ATM switch:
1 Obtain the connecting cable.
2 Connect the RJ-45 connector at one end of the cable to the RJ-45
socket on the ANA-5910.
3 Connect the RJ-45 connector at the other end of the cable to the
ATM wall port or directly to the RJ-45 socket on the ATM
switch, as illustrated in Figure 3-3. See your system
administrator for assistance.
Figure 3-3. Connecting the UTP/STP Cable to the ATM Switch