Removing atm software for netware 4.1 – Adaptec ANA-5940 User Manual
Page 106
8-16
ANA-5910/5930/5940 User’s Guide
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C
Page: 8-16
Print Spec Number: 493081-00
Current Date: 5/28/97
ECN Date: 05/29/97
Removing ATM Software for NetWare 4.1
To remove the Adaptec ATM software for Novell NetWare 4.1
1
Boot the server.
2
At the server system console prompt, type the following
command and press Enter:
load install
3
From the Installation Options menu, select
Driver options
and
press Enter.
4
From the Driver Options menu, select
Configure network
drivers
and press Enter.
5
From the Additional Driver Actions list, select
Deselect a
selected driver
and press Enter.
If only one ATM driver is installed, the Unload driver anyway?
menu appears. Go to step 8.
If two or more drivers are installed, the Selected Network
Drivers menu appears. Go to the next step.
6
From the Selected Network Drivers menu, select the driver
you want to remove and press Enter.
7
From the Unload driver anyway? menu, select Yes.
8
When the message screen appears, press Enter.
9
From the Additional Driver Actions menu, select Return to the
previous menu
and press Enter.
10
From the Driver options menu, select
Return to the previous
menu
and press Enter.
11
From the Installation Options menu, select Exit and press
Enter
.
12
From the Exit INSTALL menu, select Yes and press Enter.