Adaptec ANA-5940 - Manual (Page 65)

5-13
Installing ATM Version 2.0x Drivers for Windows NT
ANA-5910/5930/5940 User’s Guide
Stock Number: 510694-00, Rev. C
Page: 5-13
Print Spec Number: 493081-00
Current Date: 5/28/97
ECN Date: 05/29/97
Installation for Windows NT (version 3.51)
The procedures below describe installation of ATM, Classical IP
(CIP), and Lan Emulation (LANE) client device drivers for a
Windows NT ATM server using version 3.51. To ensure correct
device configuration, install these drivers in the following order:
■ Classical IP (CIP) client drivers
■ LANE drivers
■ CIP ARP server (optional drivers, purchased separately)
Installing CIP Client Drivers
To install CIP client drivers
1 In the Program Manager’s Main group window, select the
Control Panel
icon.
2 Select the Network icon.
3 Select Add Adapter.
4 Select Requires disk from manufacturer from the
Network Adapter Card drop-down list, and then select
Continue
.
5 Insert Device Driver for Windows NT Disk 1 in the diskette drive.
6 Type the drive letter of the diskette drive that contains Device
Driver for Windows NT Disk 1, and then select OK.
7 Select Adaptec Inc.ATM ANA-59x0 Adapter(CIP), and then
select OK.