General Pump KS Repair Manual - Manual (Page 16)

GENERAL PUMP
A member of the Interpump Group
KS SERIES
Page 16
Remove the head from the crankcase. Extract the high pressure seals from the head, and the low pressure
seals from their related support; be careful not to damage the seats (fig. 39).
Pay careful attention to the order of sealing pack disassembly as shown in fig. 40, composed of:
1. Head ring
2. HP seal
3. Re-stop ring
4. Packings support
5. LP seal
6. Sealing ring
7. Circlip
8. O-ring
Ref 300902 Rev.A
07-12