Programming steps – Niles Audio A4.6Ci User Manual
Page 82
82
After you choose a delay, all Master Keys turn off.
PROGRAMMING STEPS
The KEY LED turns OFF, and the PAGE LED blinks RED.
Step 8 - To add another delay, press the DELAY button again, and repeat the previous step. (For example, you can have
two consecutive one-second delays.)
Step 9 - Repeat steps 3 through 8 (Zone ON/OFF and System ON/OFF sequence) to continue identifying the Master Key Pages
where the IR commands are stored for all the steps in the Zone On/Off or System On/Off sequence you are programming.
Step 10 - Press the PROGRAM key to program a different Zone On/Off or System On/Off sequence.
The ZONE 1 LED blinks GREEN, the TRIGGER LED turns on RED.