Niles Audio A4.6Ci - Manual (Page 69)

69
Step 1 - Press and hold the PROGRAM button to enter the program mode.
The POWER/MASTER KEY SEQ. LED turns on RED, and the PAGE LED blinks RED.
PROGRAMMING STEPS
Important Note: Before you start programming the A4.6Ci:
• Assign components with a single, toggle command for ON and OFF to Inputs 1 and 2. These inputs have sync.
• Assign components with separate ON and OFF commands to Inputs 3 and 4. These inputs do not have sync.
Set-Up
1. Remove the programming cover to reveal the programming panel.
2. Connect a Master Keypad into the keypad input to the far right of the panel.
POWER COMMANDS
Step 2 - Press a Master Key where you want to program source component power IR commands.
Important Note: Every Master Key that activates a source component with IR must be programmed individually.
Master Key 2 Master Key 1
Master Key 4 Master Key 3
Master Key 6 Master Key 5
Master Key 8 Master Key 7
Select ™ Transport ™ Numeric ™