Niles Audio A4.6Ci - Manual (Page 77)

77
PROGRAMMING STEPS
Step 4 - To insert delays, press the DELAY button instead of a Function Key,
while the PAGE LED is blinking RED.
The PAGE LED turns OFF, the KEY LED blinks RED, and the first four keys on the Master Key module illuminate.
Step 5 - Choose the Master Key for the desired delay time. Refer to the table below:
DELAY TABLE
KEY
Master Key 1
DELAY TIME
.5 seconds
Master Key 2 1 seconds
Master Key 3 4 seconds
Master Key 4 8 seconds
For example, if you press Master Key 2, a one-second delay is added to the sequence.
After you choose a delay, all Master Keys turn OFF.
The KEY LED turns OFF, and the PAGE LED blinks RED.
Step 6 - To add another delay, press the DELAY button again and repeat the previous step. (For example, you can have
two consecutive one-second delays.)