Niles Audio A4.6Ci - Manual (Page 60)

Worksheet #6, Function-Key Sequence Programming
Worksheet #6 documents the steps of the sequences that have been programmed into any of the available
Function Keys for the Master A4.6Ci only.
Identify where the IR commands were programmed by using their page and key address. Copy the worksheet as
needed to document all Function Key sequences.
Please note that if a Function Key has an IR command programmed and you program a sequence on that same
Function Key, the IR command is not erased. It is, however, overridden by the sequence, so the sequence only
gets issued whenever that key is pressed.
60
PROGRAMMING OVERVIEW
1 JOB TITLE 2 SYSTEM DESIGNER
Document the customer’s name. Document the system designer’s name.
Mr. Smith John Doe
3 FUNCTION KEY SEQUENCES
Indicate the trigger page and the trigger key.
(The Trigger Key is the Function Key that will
initiate the sequence when pressed. The Trigger
Page is the Master Key page to which you need
to be selected for that specific sequence to
occur.)
3
A
TRIGGER PAGE _________ TRIGGER KEY _________
3
B
STEP PAGE DESCRIPTION
1
2
3
4
5
KEY
6
7
8
9
10
The steps in the Function Key Sequence
• Describe the IR commands, or indicate if there
are delays.
• Page and Key Address where the IR com-
mands are stored.