Niles Audio A4.6Ci - Manual (Page 42)

42
CONNECTIONS
HOME THEATER CONTROL SYSTEM
7. Voltage Sync from a Source Component to an
A4.6Ci Sync Input
When obtaining a 12V sync signal from a source compo-
nent (refer to the Source Power Synchronization section of
this manual for more information), a Niles Accessory Cable
(FG00724) connected to a Radio Shack 274-326 mini-plug
to male RCA adapter provides proper connection to any of
the three source sync Inputs.
KEYPAD MODULES
8. Keypads to Keypad Inputs for Zones 1-6
Four-pair twisted cable, terminated with male RJ-45
plugs, connects the keypads to the zoned keypad inputs
(for more information on Terminating Four-Pair Twisted
Cable, refer to page 39).
PREAMPLIFIER ZONE OUTPUTS
1. Zones 1- 6
Male to male RCA audio cables connect Zone Outputs
1-6 to an external amplifier.
1. Zones 1- 6
DB-25 Audio Cables (1-to-1 pin configuration) connect
Zone Outputs 1-6 to a Niles multi-channel amplifier.
HOME THEATER CONTROL SYSTEM
1. IR Output of a Home Theater Control System to the IR In
The mini-plug end of a Niles Accessory Cable
(FG00724) connects a Home Theater control system to
the IR input.
12V CONTROL SIGNALS
1. 12V Control Output to a Voltage Triggered Device
The mini plug end of a Niles Accessory Cable (FG00724)
connects the 12V control output to the trigger input of a
voltage-activated device (i.e., Niles AC-3).
IR FLASHERS
1. Low-Output Flasher to the Flasher Outputs
The mini-plug end of a Niles Low-Output MicroFlasher, ™
Model IRC-2P (FG00726), connects into the Flasher
Outputs 1-4. The Micro-Flasher portion of the IRC-2P is
placed directly over the IR sensor of the corresponding
source component (Source 1 for Flasher 1, Source 2 for
Flasher 2, Source 3 for Flasher 3, Source 4 for Flasher 4)
and adheres with the included peel-back tape.
1. High Output Flasher to the Flasher Outputs
The mini plug end of a Niles High-Output Flasher, Model
IRC-1P (FG00932), connects to the Flasher Output 4
labeled ADJUST. The IRC-1P is strategically positioned to
provide IR transmission to all source components and
adheres with its included Velcro mounting system.
DC POWER
1. DC Power Adapter
The 16V DC power adapter (included with the A4.6Ci)
connects to the removable power-cord socket and to an
AC power outlet.
8
9
10
11
12
13
14
15
7