Powerware 6000 - Manual (Page 72)

Communication
64 Powerware ® 9 Prestige Series User’s Guide (4500/6000 VA)
S
Rev H www.powerware.com
SELECT LAN CONFIGURATION
1 > NOVELL
ENTER SELECTION >+>
2
3
4
Q
>
>
>
>
AS400
3-COM/LAN MANAGER
CUSTOM CONFIGURATION
TO QUIT THIS MENU
Select the AS400 option if you are using OnliSafe software to
monitor the UPS.
The Custom Configuration option has two screens: the first
screen has options available for inverter shutdown, and the
second screen has options available for the contact
configuration. Consult your shutdown software
documentation for details on the required signal states for
configuring LAN communications.
A > Inverter shutdown control is enabled active HIGH (+12V)
SELECT CUSTOM LAN CONFIGURATION
ENTER SELECTION >=>
B
C
Q >
>
> TO QUIT THIS MENU Inverter shutdown control is enabled active LOW (-12V)
Inverter shutdown control is disabled
Instructions: Choose the desired inverter shutdown function.
Warning: It is recommended that this feature should not be
used with normal RS-232 communications, conflicts may occur.
1 > UTIL_FAIL is active closed, LOW_BATT is active closed
SELECT CUSTOM LAN CONFIGURATION
ENTER SELECTION >=>
2
3
4
Q >
>
>
> UTIL_FAIL is active open, LOW_BATT is active closed
UTIL_FAIL is active closed, LOW_BATT is active open
UTIL_FAIL is active open, LOW_BATT is active open
TO QUIT THIS MENU
Instructions: Choose the desired contact configuration.