John Deere STARFIRE RTK OMPFP11348 - Manual (Page 44)

900 MHz RTK—Original GreenStar Display
JS56696,00007F7 -19-15APR10-3/3
Not known coordinates: Press letter button next to
SURVEY RTK BASE LOCATION.
NOTE: After (24 hour) self survey is complete, base
station coordinates will automatically be stored and
associated with base location number (1-200). Verify
base station coordinates, see RTK INFO Pages.
Press letter button next to START SELF SURVEY. Display
can be removed while survey is in progress.
After 24 hour survey is complete, base station will
automatically store surveyed coordinates and begin
transmitting corrections. Manually record coordinates and
elevation and store in safe location. These coordinates
may be used to enter previously surveyed base station
location into different receiver.
NOTE: Absolute Base Mode, coordinates may be
manually entered, if known from previous survey.
Known Location: Press letter button next to BASE
(LATITUDE, LONGITUDE AND ALTITUDE) and enter
values for;
• Base Lat (deg)
• Base Lon (deg)
• Base Alt (ft)
A—Survey
RTK Base Location
B—Select Storage Location
C—Position StarFire Receiver
Press Start Survey Below
D—Wait 24 hours
E—Base Location will be
Stored Automatically
F— Start Self Survey
G—Return to RTK Setup
PC121
19
—UN—10JUN09
SETUP - RTK
A—Edit Stored RTK Base
Locations (1 - 200)
B—Base Latitude (deg)
C—Base Longitude (deg)
D—Base Altitude
E——
F— Survey RTK Base Location
G—Return to RTK Setup
PC12084
—UN—13MA
Y09
Setup - RTK
30-5 121511
PN=44