beautypg.com

Shared base station security—setup – John Deere STARFIRE RTK OMPFP11348 User Manual

Page 34

background image

900 MHz RTK—GS2 Display

Continued on next page

JS56696,00007F2 -19-15APR10-1/4

Shared Base Station Security—Setup

PC1

1633

—UN—02FEB09

PC1

1634

—UN—02FEB09

A—Rover Access List Setup
B—Rover Access List
C—Access List

D—Delete Rover
E—Delete List
F— Network Status

G—Toggle Button
H—Secure
I— Public

J— Previous Page
K—Next Page

Network ID must be set between 4001 - 4090 to setup and
use SBS RTK security. When the network ID has been set
between 4001 - 4090, the SBS RTK Security softkey will
appear. Select this softkey to setup SBS RTK Security.

The SBS RTK Network operator will enter into the base
station the serial numbers of RTK vehicle receivers that
are allowed to access the RTK corrections from that base
station. RTK vehicle serial numbers can be added and
removed at any time. Only those rover serial numbers
that are on the access list on the base station receiver
will be allowed to access the RTK corrections from the
base station.

The StarFire 3000 - Shared Base Station Security screen
displays the RTK vehicle receiver serial number and
location it is stored. Only the serial numbers on the RAL
will be able to receive RTK corrections from the base
station when RTK Network is in SECURE mode.

Access List button (C) allows operator to input the serial
number of a receiver into the Access List.

Delete Rover button (D) allows operator to remove a
receiver from the Access List.

Delete List button (E) allows operator to clear all inputted
receiver serial numbers from the Access List.

SBS Security can be operated in a Public or Secure mode.

Public – This mode does not restrict RTK vehicles from
receiving RTK corrections as long as they have the
same Network ID and Frequency as the base station.
This mode can be used when conducting a RTK demo
for potential customers or field days.

Secure – This mode restricts RTK vehicles from
receiving RTK corrections if their serial numbers are
not entered into the RAL

Network Status (F) can be toggled between secure status
(H) and public status (I) using toggle button (G).

25-9

121511

PN=34