John Deere STARFIRE RTK OMPFP11348 - Manual (Page 40)

900 MHz RTK—Original GreenStar Display
JS56696,00007F4 -19-15APR10-1/1
Operating Mode
IMPORTANT: Before starting SETUP procedures,
enter RTK activation number, see Enter
RTK Activation section.
NOTE: Radio can function in six different modes:
• Vehicle
• Quick Survey Base Mode
• Absolute Base Mode
• Vehicle Repeater
• Repeater
• Off
Screen: SETUP - RTK
Press: SETUP >> StarFire 3000 >> DIFF CORRECTION
SETUP >> RTK SETUP
Press letter button next to RTK OPERATION MODE and
toggle to desired selection.
Quick Survey Base Mode Absolute Base Mode
Custom Operations Drip Tape
Tillage Strip Till
Broad-acre Seeding Controlled Traffic
Row Crop
Suggested Base Station Mode For Operation
Vehicle Mode: Select for receiver on vehicle.
Vehicle Repeater Mode: This mode should only be used
in situations where multiple RTK vehicles are operating
in the same field and due to the terrain, line-of-sight is
obstructed between one of the vehicles and the base
station.
Quick Survey Base Mode: Select if exact location
of guidance tracks do not need to be stored for future
applications. If Quick Survey Base Mode is used to
establish rows or paths that will be used at a later date,
location of Track 0 must be saved using Current Field
setting in Tracking Setup (see AutoTrac Operator's
Manual). When Current Field is recalled, a one-time use
of Shift Track feature will be needed to align vehicle on
previous tracks. See Setup Quick Survey Base Mode
section.
NOTE: Quick Survey Base Mode requires a 15 minute self
survey to be conducted on location before first use.
PC12080
—UN—13MA
Y09
SETUP - RTK
A—RTK Operating Mode
B—RTK Radio Channel
Network ID
C——
D—Configure
E——
F— —
G—Return to Differential
Correction
Absolute Survey Base Mode: Select if exact location
of guidance tracks need to be stored for future guidance
applications without relying on visual reference for track
position to align using Shift Track feature. Track 0 must
be stored using Current Field in Tracking Setup in order
to follow previously used tracks. Absolute Base Mode
requires 24-hour self survey to be conducted on location
before first use. After survey is completed, base station
will then transmit corrections. If base station is moved to
another position and then returned to original surveyed
position, it is very important that base station is mounted
in exact same position. Any difference between original
surveyed position and mounted position will result in offset
of corrected position. For this reason, it is important to
mount receiver to a fixed position like building or post
mounted in concrete.
OFF Mode: This mode disables all RTK functionality in
receiver. RTK Operating Mode must be OFF for normal
SF2 operation on SF2 licensed receiver.
30-1 121511
PN=40