Inter-Tel INT4000 - Manual (Page 69)

57
INT4000 Cordless Telephone User Guide
MO
VING O
N
U
SING
A
CCOUNT
C
ODES
If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to phone record reports that the system will periodically
print.
There are three types of account codes:
• Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
• Forced account codes must be dialed before you can place an outside call.
• Optional account codes can be entered at any time during a call.
NOTE: Your System Administrator can tell you which types of account codes are used
on your telephone system.
To enter an optional account code:
1. Press and .
2. Enter the optional account code. If the account code is not immediately accepted,
press .
To set an account code for all calls placed from your phone:
Dial
and then the account code. If the account code is not immediately
accepted, press . This code will be used for all calls made from your phone until
it is disabled.
To disable the code:
Dial
and press .
SPCL 3 9 9
#
3 9 1
#
3 9 1 #