Inter-Tel INT4000 - Manual (Page 30)

18 INT4000 Cordless Telephone User Guide
I
NTRODUCTION
Now that you know what your INT4000 can do, it’s time to start using it. In this sec-
tion, you’ll learn how to make and receive calls, transfer calls, retrieve voice mail
messages, and much more.
S
TARTING THE
P
HONE
NOTE: Before using your INT4000, make sure to raise the
antenna of the base unit to the vertical position, as show on
the right.
When you pick up the handset and press , the
ACQUIRING LINK message appears, as shown on the
right.
After the connection has been made between the handset
and base unit, the TALK icon appears on the display. Then
the screen goes into standby mode, and the phone is ready
to use.
If you don’t see the TALK icon, you may see one of the following:
• NO SERVICE: Indicates that there is no connection to the base unit, and you
hear an error tone.
• LINE IN USE: Indicates that the line is in use, and you hear an error tone.
You must have a connection between the handset and the base unit to use the phone.
If the handset does not respond when you attempt to place a call or enter a feature
code, press
to acquire a link.
NOTE: If you have more than one cordless telephone in your office, they must operate
on different channels. Press to select a channel that provides the clearest com-
munication.
TALK
TALK
CH