Adjusting the angle of the cantilever arms, Installing/removing the cantilever arm armpad, Refer to adjusting – Invacare Adjustable ASBA Seat User Manual

Page 47

SECTION 8—ARMS

Adjusting the Angle of the Cantilever Arms

NOTE: For this procedure, refer to FIGURE 8.5.

NOTE: Access to the adjustment screw is on the bottom of the arm tube.

1. Adjust the cantilever arm angle as necessary to accommodate the user.

• To adjust the arm angle down, turn the adjustment screw clockwise.

• To adjust the arm angle up, turn the adjustment screw counterclockwise.

2. Repeat STEP 1 to adjust the other cantilever arm (as necessary).

FIGURE 8.5 Adjusting the Angle of the Cantilever Arms

Installing/Removing the Cantilever Arm Armpad

NOTE: For this procedure, refer to FIGURE 8.6.

NOTE: Reverse this procedure to remove the cantilever arm armpad.

Secure the new armpad to the cantilever arm tube with two screws.

FIGURE 8.6 Installing/Removing the Cantilever Arm Armpad

Back Cane

Cantilever Arm Armpad

Adjustment Screw

Arm Tube

Cantilever Arm Tube

Cantilever Arm Armpad

Screws