Invacare Adjustable ASBA Seat - Manual (Page 42)

SECTION 7—POWER ELEVATING LEGRESTS
Adjustable ASBA Seat 42 Part No 1143238
4. Remove the short shoulder screw and locknut securing the actuator rod to the actuator
bracket.
5. Remove the power elevating legrest actuator from the legrest.
Installing
1. Unscrew the actuator rod ½ turn.
2. Secure the actuator rod to the actuator bracket using the short shoulder screw and
locknut.
3. Secure the top of the power elevating legrest actuator to the power legrest bracket
using the long shoulder screw, flat washer, washer and locknut.
NOTE: The shoulder screw should be on the inside of the legrest and the locknut should be toward
the outside of the legrest.
4. Connect the actuator connector (not shown) to the TRECM or DLIAM connector (not
shown).
5. Install the power elevating legrest. Refer to Installing/Removing the Power Elevating
Legrests on page 34.
FIGURE 7.10 Removing/Installing the Power Elevating Legrest Actuator
Power Elevating Legrest Actuator
Short Shoulder Screw
Locknut
Actuator Rod
Actuator Bracket
Long Shoulder
Screw
Flat Washer
Washer
Locknut
Power Legrest Bracket
NOTE: Rear of
right power
elevating legrest
shown. Left
legrest actuator
mounts in the
same way.
Outside of
Legrest
Inside of
Legrest