Intermec 6400 - Manual (Page 75)

SECTION 3 Terminal Emulation Menu Screens
6400 Hand-Held Computer User’s Guide 3-3
Y
Up and B Down Arrows
These keys are defined by the host computer. Use these
keys to:
"
Adjust the length and frequency of the key click and
error buzzers.
"
Set the display size (the number of rows displayed
and characters per row) of the display.
Display Annunciators
Annunciators show the current status or operation in pro-
gress. The following lists some of the annunciators common
to all emulations. These annunciators occupy positions 0
through 8 of the display. A bibliography follows that tells
where more information can be found.
Display Position 0
Radio computer. The radio is transmitting data to the
base station.
Display Position 1
If the radio icon is displayed in position 0 then position 1
shows the status of the radio transmission (either receiving,
sending, communication loss, or message waiting). If there
is no radio icon shown in position 0 then this position is
blank and position 1 shows the active session number 1 or
2.
Sending. Radio is sending data to the base station.
Receiving. Radio is receiving data from the base station.
This annunciator appears only when the information is for
this particular computer’s address.