Intermec 6400 - Manual (Page 126)

Terminal Emulation Menu Screens SECTION 3
3-54 6400 Hand-Held Computer User’s Guide
To perform the Display Test:
1. From the Display Test Menu, press [ENT] to start the
test. The display screen is painted with a series of ver-
tical lines.
2. Visually inspect the lines. For the test to pass, all lines
should appear clear and complete (no broken seg-
ments); press [ENT]. The display screen is then
painted with a series of horizontal lines.
3. Visually inspect the lines using the same criteria. The
display screen is then painted black.
4. Visually inspect the painted black lines. For the test to
pass, the screen should be uniformly black; press
[ENT]. You return to the Peripherals menu.