Intermec 6400 - Manual (Page 73)

6400 Hand-Held Computer User’s Guide 3-1
Section 3
Terminal Emulation Menu Screens
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
Introduction
The Terminal Emulation Menu Screens are provided to sup-
port terminals running Intermec Terminal Emulation or
6400 TCP/IP software. This section describes the menus
used to set operating and scanning parameters for the
hand-held computer. Additional information can be found in
the programmer ’s guide or technical overview for your par-
ticular emulation program.
Keyboard Functions
Some keys on the hand-held computer have special func-
tions, which can vary depending upon the application soft-
ware. General function keys (keys that perform the same
task, regardless of the application) are described in the fol-
lowing paragraphs.
Yellow and Blue Shift Keys
Use the yellow and blue shift keys to put the keyboard in
the desired (yellow or blue) shift mode. These shifted key
functions are shown on the keyboard overlays in Appendix
C.