Intermec 6400 User Manual
Page 169
APPENDIX B
Norand
R
Utilities Program
6400 Hand-Held Computer User’s Guide B-19
NETWORK PARAMETERS with NRINET
NETWORK PARAMETERS with TFTP
If you select this option and Option 2. COMM SETTINGS
is set to NRINET or TFTP, this Network Parameters pop-
up menu appears:
SERVER NAME
SERVER IP ADDRESS
0. 0. 0. 0
CLIENT IP ADDRESS
0. 0. 0. 0
RTR
0. 0. 0. 0
SUBNET MASK
0. 0. 0. 0
NETWORK PARAMETERS
[--]QUIT
If you have an alphanumeric keyboard, press the characters
to the host name, then press the [ENT] key to save the
entry and move to the next field.
If you have a numeric keyboard, use the A and " keys to
scroll back and forth through the given set of alphanumeric
characters. After a character is selected, press the [ENT]
key to enter that character. Press [ENT] again to move to
the next field. Press the Y or B keys to move between
fields.
Press [ENT] to save the entries and exit the Network Pa-
rameters menu. Press the [--] key to exit without saving the
entries.