Intermec 6400 - Manual (Page 52)

Operation SECTION 2
2-10 6400 Hand-Held Computer User’s Guide
Battery Charger LED and Error Codes
When your battery pack is placed in a multipack or single
pack charger, the charger’s LED indicates the battery pack
charging status:
"
Red indicates that the battery is charging.
"
Green indicates the battery pack is fully charged.
"
A combination of a blinking red and orange LED can
indicate one of two basic conditions: Either a bad con-
nection, in which case you need to remove and reinsert
the battery pack into the charger, or there is a faulty
battery that needs to be replaced. However, the indica-
tor can also alert you of a more serious charging or
product error. Table 2-1 and Table 2-2 on page 2-10
show you this more extensive list of error codes and
the solution notes.
Charging Indicator Error Codes
Table 2-1
Charging Indicator Error Codes
First
Blink
Second
Blink
Third
Blink Pause Description Solution Notes
Orange Orange Orange Off High Voltage Fault 1 and 2
Red Orange Red Off No Communication 1
Orange Red Red Off Checksum Error 1
Red Red Red Off Upper Cell Mismatch 1 and 3
Red Red Orange Off Lower Cell Mismatch 1 and 3
Red Orange Orange Off 5 Bad Packets Re-
ceived
1
Orange Red Orange Off Wrong Battery Type 1