Intermec 6400 - Manual (Page 165)

APPENDIX B Norand R Utilities Program
6400 Hand-Held Computer User’s Guide B-15
Option 2 COMM SETTING
If you select this option, the Communications Settings drop-
down list appears:
1. NETWORK. . .
2. MODEM/DIRECT
3. ACCESSORY CARD
4. HANDHELD
5. INTERSERVER
Press the number of a communications settings, or press
the Y or B keys to scroll through the list, then press the
[YES] key to enter.
Suboption 1 NETWORK
If you select this suboption, a drop-down list appears with
various networks:
1. NPCP RS485
2. NPCP RS232
3. NRINET
4. TCP/IP BOOTP
5. NOVELL NETWARE
1. NETWORK. . .
Press the number of a network or press the Y or B keys to
scroll through the list, then press the [ENT] key to enter.
The computer returns to the Communications Menu with
the selected network assigned to Option 2. COMM SET-
TING. See a sample menu on page B-6.
Press the [--] key to exit this drop-down list. The computer
takes you to the Communications Menu.