Intermec 6400 - Manual (Page 139)

SECTION 4 Maintenance and Troubleshooting
6400 Hand-Held Computer User’s Guide 4-3
Cleaning Your Hand-Held Computer
Periodic cleaning helps maintain the appearance and reli-
ability of your hand-held computer. When cleaning your
computer, inspect the keyboard, covers, display, connectors,
and peripheral products for obvious signs of damage or
wear.
B CAUTION: Do not use any abrasive cleaning compounds, ketonic solvents
(acetone or ketone) or aromatic solvents (toluene or xylene) to
clean any part of your computer. These solutions cause
permanent damage to your computer.
Never pour cleaners directly on the display nor the case.
Instead put the cleanser on a soft cloth and gently wipe the
case.
Case and Display
Intermec Corporation recommends cleaning the exterior of
your computer using a soft cloth dampened with:
"
MICRO-CLEAN II cleanser, made by Foresight In-
ternational, Inc. 4887 F Street, Omaha, NE
68127-0205, telephone 1-800-637-1344
"
Glass cleaner or isopropyl alcohol
Docking Connectors
If the docking connector contacts become dirty or tarnished,
clean them with a cotton swab dipped in isopropyl (and not
ethyl) alcohol. It may also be necessary to lightly burnish
them with a pencil eraser.