Fujitsu Siemens Computers LifeBook A6210 - Manual (Page 62)

62 - Lithium ion Battery
Replacing the Battery
With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not
charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps:
1 Have a charged battery ready to install.
2 Shut down your notebook and disconnect the AC adapter.
3 Turn your notebook upside down.
4 While pushing the battery bay release latches towards the battery pack, lift the battery out of the bay using the
latches to lift it (Figure 25).
5 Insert a new battery into the bay, and press it down so that the latches click into place.
6 Plug in the AC adapter and turn the power on.
Figure 25. Removing a Battery
Battery Bay Release Latches
Battery Pack