beautypg.com

Fujitsu Siemens Computers LifeBook B6110D User Manual

Getting started with your new lifebook, What’s in the box, Register

background image

1. What’s in the Box

Check to see that all of the following are in the box:

2. Turn on Your Notebook

• Plug the AC adapter into your notebook.

• Plug the power cord into the AC adapter.

• Connect the power cord to an electrical outlet.

• Connect phone cord or ethernet cable to your notebook and

to a wall jack.

• Press the power button to turn on the notebook.

• The notebook is now on and the battery is charging.

• The notebook will begin a power-on self test.

Once successfully completed, the operating system will
begin the initialization process.

3. Register

• Enter the information as prompted to personalize your

notebook, and configure your modem to dial.

• Register your notebook with Fujitsu Service and Support via

our Web site at us.fujitsu.com/computers

Getting started with your new
LifeBook

®

B Series notebook

This convenient guide will lead you through the start-up process and

will also offer some valuable tips.

12.1" Touch

Screen Display

Display Panel Latch

Touchpad Pointing
Device

Biomentric Fingerprint Swipe
Sensor is an Optional Feature

Status Display
Panel

Wireless Antenna
Cover (Back of
LCD Cover)

Suspend/Resume/

Power On Button

Microphone

LifeBook Security

Application Panel

4. Calibrate the Touch Screen

• Select the Fujitsu Touch Screen Calibration utility in the

control panel

• Using the stylus, firmly touch and briefly hold at the center

of the red target [+]. Lift the stylus from the screen and the
target will move to a different location on the screen.

• Repeat for each of the nine target [+] points
• Finish the calibration produced by clicking the [update] button

Left Panel

DC Jack In

Headphone Jack Modem Port

(RJ-11)

USB Ports

CF Card Slot

Stylus Garage

Kensington Lock Slot

Right Panel

Microphone Jack

PC Card Slot

Status Display Panel

Quick Tips

It takes approximately 3.0
hours to charge a single
notebook battery, whether
the notebook is turned off, in
suspended mode, or in use

.

Optimizing Battery Life

Set power management setting

to Maximize Battery Life.

• Adjust display brightness levels

to lowest comfortable setting.

• Remove the PC Card when not

needed.

• Utilize Suspend mode when not

using your notebook.

• Read the Power Management

section in your User’s Guide for

additional features.

Adjusting display brightness

• Fn + F6 to decrease brightness

• Fn + F7 to increase brightness

Adjusting volume

• Fn + F8 to decrease volume

• Fn + F9 to increase volume

LifeBook notebook

Lithium ion battery (installed)

AC adapter with power cord

Stylus

Phone/modem (RJ-11) telephone cable

Drivers and Applications Restore CD

User’s Guide

Microsoft associated product materials

International Terms and Conditions Booklet and Product
Registration Card

Restore DVD

Trusted Platform Module (TPM) driver and application CD

Depending upon your configuration, the
following items may also be shipped with your notebook:

Additional lithium ion main battery

Port Replicator

External USB floppy disk drive

Bluetooth driver CD

Softex OmniPass CD

Power
Steady: On
Blinking: Suspend Mode

Hard Drive Access
Steady: In Use

Drivers

Look for the latest drivers on the Drivers and Applications

Restore CD, right click the FDU icon and select update, or

download them at us.fujitsu.com/computers

Back Panel

Wireless LAN and Bluetooth*
On/Off Switch

* Bluetooth is an optional feature

Ethernet Port (RJ-45)

External Monitor Port

Air Flow Vents

5. Activate Additional Utilities

If you have the wireless LAN model, please ensure the wireless
LAN ON/OFF switch is “on” before clicking the “click me” icon.

• Click the icon on the desktop or in the start menu to

activate additional utilities.

• Right click the Fujitsu Driver Update (FDU) icon and

follow the on-screen instructions to update your drivers. For
more information, see your User’s Guide.

The Status Display Panel is
located above the keyboard.
Following are some common
indicators.

Caps Lock
Visible: In Use

PC Card Access
Steady: In Use

PC Card Access
Steady: In Use

Battery Charging

AC Adapter
Steady: Adapter is Active

Number Lock
Visible: In Use

Wireless Access
Steady: In Use

Scroll Lock
Visible: In Use

Security Indicator
Visible: Enter Password

CLICK ME

!

Screen should only be touched with stylus

GSG_B_Series_Zest 4/26/05 12:07 PM Page 1