Using the keyboard, Using the power options, Closing the display panel – Fujitsu Siemens Computers LifeBook A6210 User Manual
Page 48
48 - Display Panel
Using the Keyboard
Adjusting the brightness using the keyboard changes the setting only temporarily.
•
[Fn+F6]: Pressing repeatedly will lower the brightness of your display.
•
[Fn+F7]: Pressing repeatedly will increase the brightness of the display.
Using the Power Options
To adjust the brightness so that the setting changes remain after the system is rebooted or resumed,
perform the following:
1
Click the Start icon, then select Control Panel.
2
Select Power Options, then click on “Adjust to Display Brightness” in the left pane.
3
Set the desired brightness for the display when it is running on battery and when plugged in.
4
Click [Save changes]..
Closing the Display Panel
1
Holding the edge of your display panel, pull it forward until it is flush with the body of your LifeBook notebook.
2
Push down until you hear a click. This will engage the locking mechanism and prevent your display panel from
opening unexpectedly.
■
W
HEN
USING
AC
POWER
YOUR
BRIGHTNESS
SETTING
IS
SET
TO
ITS
HIGHEST
LEVEL
BY
DEFAULT
.
W
HEN
USING
BATTERY
POWER
YOUR
BRIGHTNESS
SETTING
IS
SET
TO
APPROXIMATELY
MID
-
LEVEL
BY
DEFAULT
.
■
T
HE
HIGHER
THE
BRIGHTNESS
,
THE
MORE
POWER
THE
NOTEBOOK
WILL
CONSUME
AND
THE
FASTER
YOUR
BATTERIES
WILL
DISCHARGE
. F
OR
MAXIMUM
BATTERY
LIFE
,
MAKE
SURE
THAT
THE
BRIGHTNESS
IS
SET
AS
LOW
AS
POSSIBLE
.