1. If necessary, switch off the phone by holding down the key until the power-off image is displayed.
2. Remove the battery. To do so:
3. Slide the SIM card into the SIM card socket so that it locks the card into position. Make sure that the notched corner is top left and the gold contacts of the card face into the phone.
4. Place the battery back, taking care to match the tabs on the battery with the grooves on the phone.
5. Press the battery down until it clicks into place. Make sure that the battery is properly installed before switiching on the power.
Charging the Battery
1. With the battery in position on the phone, plug the connector of the travel charger into the jack at the bottom of the phone.
2. Plug the charger into a standard AC wall outlet.
3. When charging is finished, unplug the charger from the power outlet and from the phone by pressing the gray tabs on both sides of the connector and pulling the connector out.
Low Battery Indicator
Switching the Phone On or Off
1. Open the phone.
2. Hold down the key until the phone turns on.
3. If the phone asks you to enter the phone password, enter the password and press the OK soft key. The phone password is preset to “00000000” at the factory. For further details, “Access Codes” on page 117.
4. If the phone asks for a PIN, enter the PIN and press the OK soft key. For further details, “Access Codes” on page 117.
5. When you wish to switch the phone off, hold down the key until the power-off image displays.
Call Functions
Making a Call
Making a International Call
1. Press and hold down the 0 key. The + character appears.
2. Key in the country code, area code and phone number and press the key.
Correcting the Number
Ending a Call
Redialing the Last Number
1. If you have typed any characters on the display, clear the display by holding down the key for more than one second.
2. Press the key to display a list of the last numbers in the order in which the calls were made.
3. Use the Up and Down keys to scroll through the numbers until the required number is highlighted.
4.
Making a Call from the Phonebook
Adjusting the Volume
Answering a Call
1. Open the phone and press the key or the Accept soft key to answer the incoming call.
2. If the Anykey Answer option in the Extra Settings menu is checked, you can press any key to answer a call except for the key and the Reject soft key.
Viewing Missed Calls
1. Press the View soft key.
2. The number corresponding to the most recent missed call is displayed, if available.
Editing a Missed Call Number
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Edit option.
3. Press the Select soft key.
4. Change the number as required. Press the Save soft key. If no change is required press the Exit soft key.
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to highlight the Delete option.
3. Press the Select soft key to go to the Options menu.
Switching Quickly to the Silent Mode
Selecting Functions and Options
1. Press the appropriate soft key.
Setting the Display Language
1. When the idle screen is displayed, press the Menu soft key to access the menus.
2. Scroll through the menus until you reach the Phone Settings menu, by pressing the Up or Down key.
3. To select the Phone Settings menu, press the Select soft key or the key.
4. Scroll through the sub-menus until you reach the Language sub-menu, by pressing the Up or Down key.
5. To view the languages available, press the Select soft key or the key. The current setting is highlighted.
6. Scroll through the list of languages until the appropriate one is highlighted, by pressing the Up or Down key.
7. Press the Select soft key or the key to confirm your selection.
8. Press the or Left key twice to exit the menu structure.
Phonebook
Storing a Number with a Name
Storing a Number in Idle mode
1. Key in the number to be stored.
2. When you are sure that it is correct, press the Save soft key.
3. Select an entry type to identify the category of number to be stored. Three categories are available:
4. To select the category, press the Up or Down key, followed by the Select soft key.
5. Select the memory location (SIM or Phone).
6. Enter a name and press the OK soft key.
7. If you do not want to save the number and name in the suggested location, press the key to clear the location number and enter your preferred location by pressing the number keys.
8. Press the OK soft key to store the name and number.
9. After storing, the phone displays the phonebook entry or name just created.
Storing a Number Using the Phonebook Menu
1. When the idle screen is displayed, press the Ph.Book soft key.
2. Scroll to New Entry by pressing the 2 or Down key and press the Select soft key.
3. Select an Entry Type to identify the category of the number to be stored. The following four options are provided:
4. Continue the procedure from Step 4 on page 33 to store the number.
Using Phonebook Entry Options
Searching for and Dialing a Number in the Phonebook
Searching for a Number by Name
1. When the idle screen is displayed, press the Ph.Book soft key. When Search is highlighted, press the Select soft key. You are asked to enter a name.
2. Enter the first few letters of the name that you wish to find.
3. The phonebook entries are listed, starting with the first entry matching your input. This entry is also highlighted.
4. Once you have found the required entry, press the key to dial the number, or press the Options soft key to access the phonebook entry options; for further details, see page 35.
Searching for a Number by Caller Group
1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Group Search by pressing the Up or Down key and press the Select soft key. You are asked to enter a group name.
2. Enter the first few letters of the group name that you wish to find.
3. The caller groups are listed, starting with the first group matching your input. The group is also highlighted.
4. Scroll to the required group by pressing the Up or Down key and press the View soft key.
5. The phonebook entries in the selected caller group are listed.
6. Once you have found the required entry, press the key to dial the number, or press the Options soft key to access the phonebook entry options; for further details, see page 35.
Editing a Caller Group
1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Group Edit by pressing the 4 or Down key and press the Select soft key.
2. Enter the start of the required group name or scroll through the group list by pressing the Up or Down key.
3. When the required group is highlighted, press the Options soft key.
4. Select each option and change the settings, as required. The following options are available.
5. When you have finished, press the key.
Speed-Dialing
Setting Up Speed-Dial Entries
1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Speed Dial by pressing the 5 or Down key and press the Select soft key.
2. Select the key to which you wish to assign the speed-dialing feature (keys 2 to 9) and press the OK soft key.
3. Select the required phonebook entry from the list and press the View soft key.
4. Select the required number if the entry has more than one number, by pressing the Up or Down key and press the Select soft key.
5. Once you have assigned a number to the selected key, four options are available:
6. When you have finished, press the or key.
Speed-Dialing from the Phonebook
Deleting All Phonebook Entries
1. When the idle screen displays, press the Ph.Book soft key.
2. Scroll to Delete All by pressing the Up or Down key and press the Select soft key.
3. To place a check mark on the memory you want to empty, ALL, SIM or Phone, press the Mark soft key.
4. When you are finished marking, press the Delete soft key to delete the entries in the selected memory.
5. Enter the phone password and press the OK soft key.
6. When the confirming message appears, press the Yes soft key.
7. When you finish deleting, press the or the key.
Checking Memory Status
1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Memory Status option pressing the 7 or Down key and press the Select soft key.
2. Press the Up or Down keys to view the number of existing and remaining entries in the card and phone memories.
Entering Text
Changing the Text Input Mode
Using the T9 Mode
1. When you are in the T9 predictive text input mode, start entering a word by pressing keys 2 to 9. Press each key only once for one letter.
2. Enter the whole word before editing or deleting the keystrokes.
3. If the word is correct, start entering the next word.
4. Otherwise, press the 0, Up or Down key repeatedly to display alternate word choices for the keys that you have pressed.
5. Complete each word with a space by pressing the # key.
Using the Upper/Lower-Case Character Mode
1. Press the key labeled with the required letter:
2. Select the other letters in the same way.
Using the Symbol Mode
Using the Number Mode
Options During a Call
Putting a Call on Hold
1. Enter the phone number that you wish to dial or look it up in Phonebook.
2. Press the key to dial the second call. The first call is automatically put on hold.
1. Put the current call on hold by pressing the Hold soft key.
2. Make the second call in the normal way.
Switching the Microphone Off (Mute)
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Mute option.
3. Press the OK soft key. The other person can no longer hear you.
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Unmute option.
3. Press the OK soft key.
Muting/Sending Key Tones
Muting/Sending DTMF
Searching for a Number in Phonebook
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook option.
3. Press the OK soft key.The Phonebook entries are listed.
4. Enter the name that you wish to find.
5. To view the highlighted entry, press the View soft key.
Answering a Second Call
1. Press the key to answer the incoming call. The first call is automatically put on hold.
2. To switch between the two calls, press the Swap soft key.
3. To end the call on hold, press the Options soft key and select the End Held Call option.
Making a Multi-party Call
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call is automatically put on hold.
3. To join the first participant to the multi-party call, press the Options soft key and select the Join option. Press the OK soft key.
4. To add a new person to the multi-party call, call the person in the normal way and press the Options soft key. Select the Join option and press the OK soft key.
Having a Private Conversation With One Participant
1. Press the Options soft key and choose the Select One option. Press the OK soft key.
2. Highlight a person from the list by pressing the Up or Down key, and press the Select soft key or the key.
3. When the Private option highlights, press the OK soft key.
4. Now you can talk privately with that person. The other participants can still converse with each other.
5. To return to the multi-party call, press the Options soft key and select the Join option. Press the OK soft key.
Dropping One Participant
1. Press the Options soft key and choose the Select One option. Press the OK soft key.
2. Highlight a person from the list by pressing the Up or Down key, and press the Select soft key or the key.
3. Press the Down key to select the Remove option and press the OK soft key.
4. When you want to end the multi-party call, close the phone or press the key.
Using the Menus
Accessing a Menu Function by Scrolling
1. In Idle Mode, press the Menu soft key to access Menu Mode.
2. Scroll with the Up or Down key to reach a main menu, Phone Settings for example. Press the Select soft key or the Right key to enter the menu.
3. If the menu contains any sub-menus, Language for example, you can access them by scrolling with the Up or Down key and pressing the Select soft key or the Right key.
Accessing a Menu Function by Using its Shortcut
1. Press the Menu soft key.
2. Press the 6 key for Phone Settings.
3. Press the 5 key for Language.
List of Menu Functions
1. Text Messages
2. Picture Messages
3. Call Records
4. Camera
5. Sound Settings
6. Phone Settings
7. Organizer
8. Network Services
9. Funbox
Text Messages
Reading a Message
1. Select the required box and press the Select soft key.
2. Select the required message and press the View soft key to view the message contents.
3. To scroll through the message, press the Up or Down key.
Write New
Creating a Simple Text Message
1. Create your message as required.
2. When you have completed your message, press the Options soft key. The following options are available.
3. Select Send Only or Save and Send, and press the Select soft key.
4. Enter a destination number and press the OK soft key. The message is sent.
Creating a Message using the Options
1. Create your message as required.
2. Press the Options soft key.
3. Select one of the following options as required by using the Up and Down keys and pressing the Select soft key.
4. Complete the message, and send or save it by following the procedure from Step 2 on page 60.
Templates
Settings
Delete All
Memory Status
Voice Mail
Broadcast
Picture Messages
Inbox
Viewing a Message When You Receive it
1. Press the View soft key to view the message.
2. To scroll through the message information, press the Up or Down key.
Viewing a Received Message in the Inbox
Outbox
Draft
Write New
1. Enter the subject of your message and press the
2. When Add Here highlights, press the Options soft key and add the message contents using one of the following options:
3. When the added content displays, press the Down key to highlight Add Here.
4. Repeat steps 2 and 3 until you finish creating your message.
5. If you want to change the added items, press the Up or Down key to highlight one and press the Options soft key. The following options are available:
6. When you finish creating the message, choose Send from the options and press the Select soft key.
7. Choose one of the following options and press the Select soft key:
8. Enter a number or an e-mail address, or select a number in Phonebook.
9. When the correct number or address displays, press the OK soft key.
10. To send the message to multiple destinations, select Add Destination and press the Select soft key.
11. Repeat steps 7 to 10. You can enter up to 11 destinations.
12. When you are finished entering the destinations, select Send Message and press the Select soft key. Your phone sends the message.
Templates
1. Scroll through the template list using the Up and Down keys. When the message template you want highlights, press the Select soft key. The message text displays.
2. Press the OK soft key to use the following options:
Delete All
Memory Status
Call Records
Missed Calls
Incoming Calls
Outgoing Calls
Delete All
Call Time
Camera
Take and Send
Taking a Picture to Send a Message
1. Accessing the Take and Send menu turns on the camera at the front of the phone’s outer display. You can see the picture to be captured on the display.
2. Adjusting the image and aiming it to the subject:
3. If lighting is poor and a flash is required, select the right soft key to toggle the flash on and off.
4. Press the Camera soft key on the right side of the phone or the the to take the picture.
5. Press the Save soft key.
6. When you press the Next soft key after saving a picture, the following options are available:
Using the Camera options
My Photos
My Album
1. Select Next to go to the Photo Menu.
2. Select 1 or Send to name the picture and then press the OK soft key.
3. Select option 2 or Send to My Album. The Picture Messages screen is displayed and your picture is stored in the Picture Outbox and sent to your album.
My Journal
1. Select Next to go to the Photo Menu.
2. Select 1 or Send to name the picture and then press the OK soft key.
3. Select option 3 or Send to My Journal. The Picture Messages screen is displayed and your picture is sent to your journal and is also stored in the Picture Outbox.
Memory Status
Sound Settings
Ring Tone
Ring Volume
Alert Type
Keypad Tone
Message Tone
SMS Tone
SMS CB Tone*
Multi-Media Messaging Service (MMS) Tone
Folder Tone
Power On/Off
Extra Tones
Phone Settings
Infrared Activate
Display Settings
Wallpaper
1. Scroll through the list by pressing the Up or Down key.
2. Press the Select soft key when the required image is highlighted.
3. After viewing the image, press the Select soft key to display it on the idle screen.
Menu Style
1. Adjust the contrast by using the Up and Down keys or the keys on the left side of the phone.
2. When you are satisfied, press the OK soft key to save the selection.
Back Light
Auto Light
Service Light
Graphic Logo
Front LCD Display
Greeting Message
Own Number
Language
Security
PIN Check
Change PIN
Phone Lock
Change Password
Privacy
FDN Mode
Change PIN2
Extra Settings
ShortCut
1. Select the key to be used as a shortcut key by pressing the Up or Down key, followed by the Select soft key.
2. Select the menu option to be assigned to the key by pressing the Up or Down key.
3. Press the Select soft key to save the selection.
Reset Settings
1. Select the Reset Settings menu option.
2. Enter the 8-digit phone password and press the OK soft key.
Organizer
Alarm
1. Choose the type of alarm to be set.
2. Enter the required time and day of the week, if applicable.
3. Press the OK soft key.
4. If you select Morning Call in Step 1, select the repeat option: Monday to Friday or Monday to Saturday.
Calendar
Consulting the Calendar
Writing a Memo
1. Select a date on the calendar, using the navigation keys.
2. Press the Select soft key.
3. Enter your memo and then press the OK soft key.
4. If you want an alarm to ring on the chosen day, press the Yes soft key.
5. If you pressed the Yes soft key, set the time for the alarm and press the OK soft key.
6. When you use the 12-hour time format, select AM or PM and press the OK soft key.
Editing a Memo
1. To edit a memo, select the Calendar menu option.
2. Press the Options soft key.
3. Select the Edit menu option and edit the memo appropriately.
Time & Date
1. Select the city corresponding to your time zone by pressing the Left or Right key one or more times. The local date and time display.
2. Press the Set soft key.
Calculator
1. Enter the first number using the numeric keys.
2. Press the right soft key until the required arithmetic symbol appears; + (addition), - (subtraction), * (multiplication), / (division).
3. Enter the second number.
4. To view the result, press the key.
5. Repeat steps 2 to 4 as many times as required.
To Do List
Creating the To Do List
1. Press the New soft key.
2. Enter the new task.
3. Press the OK soft key.
4. Select high, normal or low priority using the Up and Down keys and press the Select soft key.
5. Enter your deadline and press the OK soft key.
Editing the To Do List
1. highlight the task.
2. press the View soft key.
3. scroll through the tasks using the Up and Down keys, if necessary.
1. highlight the task.
2. press the * key to mark the task as completed as of the current date and time.
1. highlight the task.
2. press the Options soft key.
3. select the Mark option.
4. select the appropriate status (Done or Undo).
1. press the Options soft key.
2. select the New option.
3. enter the text, priority and/ or deadline for the task.
1. highlight the task.
2. press the Options soft key.
3. select the Edit option.
4. change the text, priority and/or deadline for the task, as required.
1. press the Options soft key.
2. select the Sort option.
3. select the sort criterion (High, Low, Done or Undo).
1. highlight the task.
2. press the Options soft key.
3. select the Copy option.
4. change the text, priority and/or deadline for the task, as required.
1. highlight the task.
2. press the Options soft key.
3. select the Copy to Calendar option.
4. change the text and deadline for the task and set the alarm, as required.
1. highlight the task.
2. press the Options soft key.
3. select the Delete option.
1. press the Options soft key.
2. select the Delete All option.
3. confirm the deletion by pressing the OK soft key.
1. press the Options soft key.
2. select the Exit option.
Voice Memo
1. Replay
2. Re-record
3. Save
4. Quit
Currency Exchange
1. Enter the current exchange rate of your source currency and press the OK soft key.
2. Enter the amount to convert and press the OK soft key.
3. Press the Exit soft key to exit the currency convertor.
Network Services
Call Forwarding
1. Select the type of call forwarding required by pressing the Up or Down key until the appropriate option is highlighted, and then press Select.
2. Select the type of calls to be forwarded by pressing the Up or Down key until the appropriate option is highlighted and then press Select.
3. Enter the number to which the calls are to be forwarded and press OK. To enter the international code, press the 0 key until the + sign is displayed.
Call Waiting
1. Select the type of calls to which the call waiting option is to be applied by pressing the Up or Down key until the appropriate option is highlighted and then press the Select soft key.
2. You can activate or deactivate the call waiting feature as necessary by using the Activate or Deactivate soft key respectively.
Network Selection
1. When Network Selection is displayed, press the Select soft key.
2. Press the Up or Down key until the appropriate option is highlighted and then press the OK soft key.
3. Press the Up or Down key until the preferred network is highlighted and then press the OK soft key.
Caller ID
Funbox
t-zones
Home
Favorite
1. Select an empty location and press the Options soft key.
2. Enter the address and press the Enter soft key.
3. Enter a name for the favorite item and press the Enter soft key.
Go to URL:
Clear Cache
Push Message
Games
Sounds
Images
Delete All
Memory Status
Solving Problems
When you switch your phone on, the following messages may appear
Insert SIM Card
Phone Locked Enter Password
Enter PIN
Enter PUK
“No service,” “Network failure” or “Not done” is displayed
You have entered a number but it was not dialed
Your correspondent cannot reach you
Your correspondent cannot hear you speaking
The phone starts beeping and “**Warning** Low Battery” flashes in the display
The audio quality of the call is poor
No number is dialed when you recall a phonebook entry
Access Codes
Phone Password
PIN
PUK
1. Key in the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft key.
3. When the Confirm New PIN message is displayed, key in the same code again and press the OK soft key.
PIN2
PUK2
1. Key in the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK soft key.
3. When the Confirm PIN2 message is displayed, key in the same code again and press the OK soft key.
WAP Browser
About the WAP Browser
Accessing the WAP Browser
1. When the idle Screen is displayed, press the Menu soft key to enter the menu mode.
2. Press the Up or Down until the Funbox menu option is displayed, and then press the Select soft key. You can also press the 9 key directly.
3. Press the Select soft key or the 1 key directly.
4. Press the Up or Down key one or more times to highlight the required option and then press the Select soft key.
Starting the WAP Browser
Exiting the WAP Browser
Using the WAP Browser
Using the Soft Keys
Navigating the Wap Browser
Entering Text, Numbers or Symbols
Using and Selecting WAP Menu Options
1. Press and hold down the * key. A menu is displayed.
2. Highlight the required menu option by pressing the Up and Down keys.
3. Select the option by pressing the Select soft key.
4. If necessary, select the secondary option using the Up and Down keys, and press the Select soft key to confirm.
Reload
Home
Go to URL
Show URL
Health and Safety Information
Usage guidelines: All about performance and safety
Getting the Most Out of Your Reception
Understanding the Power Save Feature
Understanding How Your Phone Operates
Knowing Radio Frequency Safety
Maintaining Your Phone’s Peak Performance
Maintaining Safe Use of and Access to Your Phone
Using Your Phone While Driving
Following Safety Guidelines
Using Your Phone Near Other Electronic Devices
Turning Off Your Phone Before Flying
Turning Off Your Phone in Dangerous Areas
Restricting Children’s Access to your Phone
Caring for the Battery
Disposal of Lithium Ion (Li-Ion) Batteries
Acknowledging Special Precautions and FCC
FCC Notice
Cautions
Body-Worn Operation
SAR Values
FDA Consumer Update
Do wireless phones pose a health hazard?
What is FDA’s role concerning the safety of wireless phones?
What kinds of phones are the subject of this update?
What are the results of the research done already?
What research is needed to decide whether RF exposure from wireless phones poses a health threat?
What is FDA doing to find out more about the possible health effects of wireless phone RF?
How can I find out how much radio frequency energy exposure I can get by using my wireless phone?
What has FDA done to measure the radio frequency energy coming from wireless phones?
What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?
What about children using wireless phones?
What about wireless phone interference with medical equipment?
Where can I find additional information?
CTIA Safety Information
Exposure to radio frequency signals
Driving
Electronic devices
Pacemakers
Hearing aids
Other medical devices
Vehicles
Posted facilities
Aircraft
Blasting areas
Potentially explosive atmospheres
For vehicles equipped with an airbag
Owner's Record
User Guide Proprietary Notice
STANDARD LIMITED WARRANTY
Glossary
Index
A
B
C
D
E
F
G
I
K
L
M
N
O
P
R
S
T
U
V
W
1. Press the Menu soft key.
2. Scroll with the UP and DOWN arrow keys through the list of the menus until you reach the required menu.
3. Press the Select soft key.
4. Scroll with the UP and DOWN arrow keys through the list of the options until the required one is selected.
