MTS Fatigue Template Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for Fatigue Template MTS
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 122 |
| Size: | 1.49 MB |
Show table of contents
Document Outline
- 1.0 Technical Support
- 2.0 Preface
- 3.0 Overview
- 4.0 Test Setup
- 5.0 ASTM Low-Cycle Fatigue (LCF) Strain Template
- 6.0 ASTM Low-Cycle Fatigue (LCF) Elevated Temperature Template
- 6.1.0 Set Up the Test
- 6.2.0 Define Test Parameters
- 6.3.0 Run the Test
- 6.3.1.0 Modulus Check at Start Temperature
- 6.3.2.0 Start Temperature Strain
- 6.3.3.0 Measure Modulus
- 6.3.4.0 Ramp to Test Temperature
- 6.3.5.0 Measure Thermal Strain
- 6.3.6.0 Measure Thermal Modulus
- 6.3.7.0 Ramp to Start Temperature
- 6.3.8.0 Strain-Controlled Test
- 6.3.9.0 Strain Test
- 6.3.10.0 Reattach Extensometer
- 6.3.11.0 Create a Fatigue Test Report
- 6.3.12.0 Test Completion
- 6.4.0 View Test Results
- 6.5.0 Analyze Data
- 7.0 ASTM High-Cycle Fatigue (HCF) Load Test Template
- 8.0 Transition Test Template
- 8.1.0 Set Up the Test
- 8.2.0 Run the Test
- 8.2.1.0 Strain Test Parameters
- 8.2.2.0 Strain Termination Parameters
- 8.2.3.0 Data Storage Parameters
- 8.2.4.0 Load Termination Parameters
- 8.2.5.0 Transition Parameters
- 8.2.6.0 Load Test Parameters
- 8.2.7.0 Extensometer Calibration
- 8.2.8.0 Verify the Extensometer
- 8.2.9.0 Modulus Check at Start Temperature
- 8.2.10.0 Measure Modulus
- 8.2.11.0 Strain Test
- 8.2.12.0 Reattach Extensometer
- 8.2.13.0 Load Test
- 8.2.14.0 Create a Fatigue Test Report
- 8.2.15.0 Test Completion
- 8.3.0 View Test Results
- 8.4.0 Analyze Data
- 9.0 Transition Test Elevated Temperature Template
- 9.1.0 Set Up the Test
- 9.2.0 Run the Test
- 9.2.1.0 Temperature Parameters
- 9.2.2.0 Strain Termination Parameters
- 9.2.3.0 Data Storage Parameters
- 9.2.4.0 Transition Parameters
- 9.2.5.0 Load Test Parameters
- 9.2.6.0 Load Test
- 9.2.7.0 Load Termination Parameters
- 9.2.8.0 Extensometer Calibration
- 9.2.9.0 Verify the Extensometer
- 9.2.10.0 Start Temperature Strain
- 9.2.11.0 Modulus Check at Start Temperature
- 9.2.12.0 Measure Modulus
- 9.2.13.0 Ramp to Test Temperature
- 9.2.14.0 Measure Thermal Strain
- 9.2.15.0 Measure Thermal Modulus
- 9.2.16.0 Strain Test
- 9.2.17.0 Reattach Extensometer
- 9.2.18.0 Load Test
- 9.2.19.0 Ramp to Start Temperature
- 9.2.20.0 Create a Fatigue Test Report
- 9.2.21.0 Test Completion
- 9.3.0 View Test Results
- 9.4.0 Analyze Data
- 10.0 ASTM Trapezoidal Strain Template
- 10.1.0 Set Up the Test
- 10.2.0 Run the Test
- 10.2.1.0 Strain Test Parameters
- 10.2.2.0 Strain Termination Parameters
- 10.2.3.0 Data Storage Parameters
- 10.2.4.0 Extensometer Calibration
- 10.2.5.0 Verify the Extensometer
- 10.2.6.0 Modulus Check at Start Temperature
- 10.2.7.0 Measure Modulus
- 10.2.8.0 Strain-Controlled Test
- 10.2.9.0 Strain Test
- 10.2.10.0 Reattach Extensometer
- 10.2.11.0 Create a Fatigue Test Report
- 10.2.12.0 Test Completion
- 10.3.0 View Test Results
- 10.4.0 Analyze Data
- 11.0 ASTM Trapezoidal Strain Elevated Temperature Template
- 11.1.0 Set Up the Test
- 11.2.0 Run the Test
- 11.2.1.0 Temperature Parameters
- 11.2.2.0 Strain Test Parameters
- 11.2.3.0 Strain Termination Parameters
- 11.2.4.0 Data Storage Parameters
- 11.2.5.0 Extensometer Calibration
- 11.2.6.0 Verify the Extensometer
- 11.2.7.0 Modulus Check at Start Temperature
- 11.2.8.0 Measure Modulus
- 11.2.9.0 Ramp to Test Temperature
- 11.2.10.0 Strain-Controlled Test
- 11.2.11.0 Measure Thermal Strain
- 11.2.12.0 Measure Thermal Modulus
- 11.2.13.0 Ramp to Start Temperature
- 11.2.14.0 Strain-Controlled Test
- 11.2.15.0 Strain Test
- 11.2.16.0 Reattach Extensometer
- 11.2.17.0 Create a Fatigue Test Report
- 11.2.18.0 Test Completion
- 11.3.0 View Test Results
- 11.4.0 Analyze Data
- Index