Kenmore INTELLISOFT 420 SERIES 625.38426 Instruction Manuals and User Guides

We have 1 Instruction Manual and User Guide for INTELLISOFT 420 SERIES 625.38426 Kenmore

Kenmore INTELLISOFT 420 SERIES 625.38426 User Manual, 52 pages

Recognized languages:	English
Pages:	52
Size:	680 KB

Show table of contents

Document Outline

OWNER'S MANUAL
With High Performance Vaive
- WARRANTY ON WATER SOFTENER
- TABLE OF CONTENTS
Safety Guides
Unpack and Check Your Carton
- INSPECT SHIPMENT
- PARTS DESCRIPTIONS
Plan Your Installation
- PLAN YOUR INSTALLATION
- TOOLS NEEDED:
- WHERE TO INSTALL THE WATER SOFTENER
- Suggested Slab Foundation Installation
Read Before Beginning Installation
- BEFORE INSTALLING CHECKS & TESTS
Install Single Bypass Valve
- ASSEMBLE INLET OUTLET ADAPTORS,
- OR SINGLE BYPASS VALVE
  - FIG. 7
  - FIG. 8
- BYPASS VALVE:
- INLET AND OUTLET THREADED ADAPTORS:
- INSTALLING BYPASS VALVE, AND/OR INLET AND OUTLET THREADED ADAPTORS
Install Single Bypass Valve
Install 3-Valve Bypass
- INSTALLING 3 VALVE BYPASS AND PIPES
Locate Water Softener and Connect Pipes
- POSITION SOFTENER INTO PLACE
- CONNECT THE SOFTENER
- MOVE SOFTENER INTO PLACE
- TYPICAL SOLDERING CONNECTIONS
  - FIG. 15
Connect Valve and Salt Tank Drains
- CONNECT THE VALVE DRAIN HOSE
- CONNECT SALT TANK OVERFLOW TUBING
  - FIG. 16
Leak Test
- LEAK TEST
  - 6. Close both cold water faucets.
- HOUSE MAIN WATER
- VALVE BYPASS
  - FIG. 19
Electrical Requirements
- INSTALL GROUNDING CLAMP BETWEEN THE SOFTENER IN AND OUT PIPES
- ELECTRICAL POWER OUTLET FOR YOUR SOFTENER
- PLUG IN THE TRANSFORMER
Install Covers and Restart Water Heater
- INSTALL COVERS
- RESTART THE WATER HEATER
  - YOUR PLUMBING INSTALLATION AND ELECTRICAL WORK ARE NOW COMPLETE.
Program The Timer
- PROGRAM THE TIMER
  - FIG. 24
  - FIG. 25
Program The Timer
- SET PRESENT TIME OF DAY
  - FIG. 26
- SET WATER HARDNESS NUMBER
  - FIG. 27
Program The Timer
- SET REGENERATION TIME
Sanitize The Water Softener
- SANITIZE THE WATER SOFTENER
  - SANITIZE YOUR WATER SOFTENER AS FOLLOWS:
  - You can sanitize the softener with or without salt in the storage tank.
Adding Salt To The Storage Tank
- ADDING SALT TO THE STORAGE TANK
- WATER SOFTENING SALT WITH IRON REMOVING ADDITIVES
Check
- CHECK LIST OF STEP-BY-STEP GUIDES TO INSTALL
  - FIG. 32
- EXTRA RECHARGE
- RECHARGE NOW
- RECHARGE TONIGHT
- MENU SELECTIONS:
- SETTINGS:
  - FIG. 33
  - FIG. 34
  - FIG. 35
  - FIG. 36
  - FIG. 38
  - FIG. 39
  - FIG. 40
- OPTIONS:
  - FIG. 41
  - FIG. 42
  - FIG. 44
  - FIG. 45
- UNITS:
  - FIG. 48
- SERVICE MODE:
- KENMORE’S ULTRA CLEANSING FEATURE
- SOFT W/VTER SERVICE AND REGENERATION SERVICE
  - REGENERATION
- SOFT W/VTER SERVICE AND REGENERATION
- WATER FLOW THROUGH THE SOFTENER IN BRINING AND BRINE RINSE
- WATER FLOW THROUGH THE SOFTENER IN BACKWASH
  - SOFT WATER SERVICE AND REGENERATION AUTOMATIC BYPASS
    - ELECTRONICS
- WATER FLOW THROUGH THE SOFTENER IN FAST RINSE
  - SALT BRIDGE
  - KEEPING THE W/VTER SOFTENER CLEAN NOZZLE & VENTURI
    - 7. Install and tighten the cap, by hand only. Do not overtighten, which may break the cap or housing.
  - IRON FROM RESIN BED
  - PROTECT THE WATER SOFTENER FROM FREEZING
  - CHECKLIST TO HELP YOU SAVE MONEY
  - BYPASS VALVES
    - FIG. 59
  - MODEL NO. 625.384260 - TIMER CODE H46
- Pressure Drop (PSI) vs. Flow Rate (GPM)
  - FIG. 60
- FACEPLATE
  - FIG. 61
  - ALWAYS MAKE THESE INITIAL CHECKS FIRST
  - PROCEDURE FOR REMOVING ERROR CODE FROM FACEPLATE:
    - FIG. 63
    - TIMER PWA REPLACEMENT
  - MANUAL ADVANCE REGENERATION CHECK
    - CYCLE FLOW RATES (GALLONS PER MIN.)
  - ROTARY VALVE SERVICE
  - TO RELIEVE PRESSURE:
  - DISASSEMBLY
  - SERVICING THE VALVE
  - ASSEMBLY
- W/VTER FLOW THROUGH THE SOFTENER VALVE
  - SERVICE CYCLE
  - FILL CYCLE
- SERVICE CYCLE
- BRINING AND BRINE RINSE CYCLE
  - BRINING AND BRINE RINSE CYCLES
- W/VTER FLOW THROUGH THE SOFTENER VALVE
- BACKWASH CYCLE
  - BACKWASH CYCLE
- FAST RINSE CYCLE
  - FAST RINSE CYCLE
Get it fixed, at your home or ours!

Popular Brands

Popular manuals