Kenmore 625.38306 Instruction Manuals and User Guides

We have 1 Instruction Manual and User Guide for 625.38306 Kenmore

Recognized languages:	English
Pages:	96
Size:	1.26 MB

Show table of contents

Document Outline

ONE YEAR LIMITED WARRANTY ON WATER SOFTENER
TEN YEAR LIMITED WARRANTY AGAINST LEAKS
This warranty covers only defects in material and workmanship. Sears will NOT pay for:
Disclaimer of implied warranties; limitation of remedies
Safety Guides
Unpack and Check Your Carton
- INSPECT SHIPMENT
- PARTS DESCRIPTIONS
Plan Your Installation
- PIPE, FITTINGS, OTHER MATERIALS NEEDED
- OUT
- SOLDERED
- IN
- IN
Read Before Beginning Installation
- BEFORE INSTALLING CHECKS & TESTS
Install Single Bypass Valve
- ASSEMBLE INLET OUTLET ADAPTORS,
- OR SINGLE BYPASS VALVE
- BYPASS VALVE:
- INLET AND OUTLET THREADED ADAPTORS:
- INSTALLING BYPASS VALVE, AND/OR INLET AND OUTLET THREADED ADAPTORS
Install Single Bypass Valve
- FIG. 10
- BYPASS VALVE TURNED DOWNWARD
Install 3-Valve Bypass
- INSTALLING 3 VALVE BYPASS AND PIPES
Locate Water Softener and Connect Pipes
- POSITION SOFTENER INTO PLACE
- CONNECT THE SOFTENER
- MOVE SOFTENER INTO PLACE
- TYPICAL SOLDERING CONNECTIONS
Connect Valve and Salt Tank Drains
- CONNECT THE VALVE DRAIN HOSE
  - FIG. 16
Leak Test
- LEAK TEST
  - 6. Close both cold water faucets.
- HOUSE MAIN WATER
- VALVE BYPASS
  - FIG. 19
Electrical Requirements
- INSTALL GROUNDING CLAMP BETWEEN THE SOFTENER IN AND OUT PIPES
- COLD WATER PIPE GROUNDING
  - ELECTRICAL POWER OUTLET FOR YOUR SOFTENER
  - PLUG IN THE TRANSFORMER
- WATER METER JUMPER WIRE
- CONNECTING TRANSFORMER
Install Covers and Restart Water Heater
- INSTALL COVERS
- RESTART THE WATER HEATER
Program The Timer
- FIG. 24
- PROGRAM THE TIMER
  - FIG. 25
- SET PRESENT TIME OF DAY
Program The Timer
- SET W/VTER HARDNESS NUMBER
- SET REGENERATION TIME
- SET SALT LEVEL
- SANITIZE THE WATER SOFTENER
  - SANITIZE YOUR WATER SOFTENER AS FOLLOWS:
  - You can sanitize the softener with or without salt in the storage tank.
Adding Salt To The Storage Tank
- ADDING SALT TO THE STORAGE TANK
- WATER SOFTENING SALT WITH IRON REMOVING ADDITIVES
Check
- CHECK LIST OF STEP-BY-STEP GUIDES TO INSTALL
- EXTRA RECHARGE
- RECHARGE NOW
- RECHARGE TONIGHT
- SALT MONITOR SYSTEM
- To set this monitor system:
- FIG. 31
- FIG. 32
- FIG. 33
  - California Efficiency Requirement
- EFFICIENCY MODE
  - To turn this setting ON:
- PROGRAM MEMORY
- ERROR CODE
  - FIG. 35
- SOFT W/VTER SERVICE AND REGENERATION SERVICE
  - REGENERATION
- WATER FLOW THROUGH THE SOFTENER IN FILL
  - SOFT W/VTER SERVICE AND REGENERATION
- WATER FLOW THROUGH THE SOFTENER IN BRINING AND BRINE RINSE
- WATER FLOW THROUGH THE SOFTENER IN BACKWASH
How Your Water Softener Works
- SOFT WATER SERVICE AND REGENERATION AUTOMATIC BYPASS
- WATER FLOW THROUGH THE SOFTENER IN FAST RINSE
- FACEPLATE
- W/VTER FLOW THROUGH THE SOFTENER VALVE
  - SERVICE CYCLE
  - FILL CYCLE
- SERVICE CYCLE
- BRINING AND BRINE RINSE CYCLE
  - BRINING AND BRINE RINSE CYCLES
- W/VTER FLOW THROUGH THE SOFTENER VALVE
- BACKWASH CYCLE
  - BACKWASH CYCLE
- FAST RINSE CYCLE
  - FAST RINSE CYCLE
Exploded View
- Kenmore Model No.
- 625.383060
Exploded View
- Kenmore Model No.
- 625.383060
Exploded View
- Your Home
- Our Home
Safety Guides
Unpack and Check Your Carton
- INSPECT SHIPMENT
- PARTS DESCRIPTIONS
Plan Your Installation
- PIPE, FITTINGS, OTHER MATERIALS NEEDED
- OUT
- SOLDERED
- IN
- IN
Read Before Beginning Installation
- BEFORE INSTALLING CHECKS & TESTS
Install Single Bypass Valve
- ASSEMBLE INLET OUTLET ADAPTORS,
- OR SINGLE BYPASS VALVE
- BYPASS VALVE:
- INLET AND OUTLET THREADED ADAPTORS:
- INSTALLING BYPASS VALVE, AND/OR INLET AND OUTLET THREADED ADAPTORS
Install Single Bypass Valve
- FIG. 10
- BYPASS VALVE TURNED DOWNWARD
Install 3-Valve Bypass
- INSTALLING 3 VALVE BYPASS AND PIPES
Locate Water Softener and Connect Pipes
- POSITION SOFTENER INTO PLACE
- CONNECT THE SOFTENER
- MOVE SOFTENER INTO PLACE
- TYPICAL SOLDERING CONNECTIONS
Connect Valve and Salt Tank Drains
- CONNECT THE VALVE DRAIN HOSE
  - FIG. 16
Leak Test
- LEAK TEST
  - 6. Close both cold water faucets.
- HOUSE MAIN WATER
- VALVE BYPASS
  - FIG. 19
Electrical Requirements
- INSTALL GROUNDING CLAMP BETWEEN THE SOFTENER IN AND OUT PIPES
- COLD WATER PIPE GROUNDING
  - ELECTRICAL POWER OUTLET FOR YOUR SOFTENER
  - PLUG IN THE TRANSFORMER
- WATER METER JUMPER WIRE
- CONNECTING TRANSFORMER
Install Covers and Restart Water Heater
- INSTALL COVERS
- RESTART THE WATER HEATER
Program The Timer
- FIG. 24
- PROGRAM THE TIMER
  - FIG. 25
- SET PRESENT TIME OF DAY
Program The Timer
- SET W/VTER HARDNESS NUMBER
- SET REGENERATION TIME
- SET SALT LEVEL
- SANITIZE THE WATER SOFTENER
  - SANITIZE YOUR WATER SOFTENER AS FOLLOWS:
  - You can sanitize the softener with or without salt in the storage tank.
Adding Salt To The Storage Tank
- ADDING SALT TO THE STORAGE TANK
- WATER SOFTENING SALT WITH IRON REMOVING ADDITIVES
Check
- CHECK LIST OF STEP-BY-STEP GUIDES TO INSTALL
- EXTRA RECHARGE
- RECHARGE NOW
- RECHARGE TONIGHT
- SALT MONITOR SYSTEM
- To set this monitor system:
- FIG. 31
- FIG. 32
- FIG. 33
  - California Efficiency Requirement
- EFFICIENCY MODE
  - To turn this setting ON:
- PROGRAM MEMORY
- ERROR CODE
  - FIG. 35
- SOFT W/VTER SERVICE AND REGENERATION SERVICE
  - REGENERATION
- WATER FLOW THROUGH THE SOFTENER IN FILL
  - SOFT W/VTER SERVICE AND REGENERATION
- WATER FLOW THROUGH THE SOFTENER IN BRINING AND BRINE RINSE
- WATER FLOW THROUGH THE SOFTENER IN BACKWASH
How Your Water Softener Works
- SOFT WATER SERVICE AND REGENERATION AUTOMATIC BYPASS
- WATER FLOW THROUGH THE SOFTENER IN FAST RINSE
- FACEPLATE
- W/VTER FLOW THROUGH THE SOFTENER VALVE
  - SERVICE CYCLE
  - FILL CYCLE
- SERVICE CYCLE
- BRINING AND BRINE RINSE CYCLE
  - BRINING AND BRINE RINSE CYCLES
- W/VTER FLOW THROUGH THE SOFTENER VALVE
- BACKWASH CYCLE
  - BACKWASH CYCLE
- FAST RINSE CYCLE
  - FAST RINSE CYCLE
Exploded View
- Kenmore Model No.
- 625.383060
Exploded View
- Kenmore Model No.
- 625.383060
Exploded View
- Your Home
- Our Home

Popular Brands

Popular manuals