Plan your installation, Tools needed – Kenmore 625.38306 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Plan Your Installation

PLAN YOUR INSTALLATION
It is recommended to read through the entire manual before
beginning your installation. Follow all steps exactly. Reading this
manual will also help you get all the benefits from your system.

TOOLS NEEDED:
• Safety glasses
• Flathead screw driver
• Phillips screw driver
• Adjustable slip joint pliers
• Tape measure or ruler

SOLDERED COPPER

THREADED PIPE

CPVC OR PVC PLASTIC

• Tubing Cutter

• Flacksaw or Pipe Cutter

• Flacksaw

• Propane Torch

• Pipe Wrenches

• Adjustable Wrench

• Solid Core LEADFREE Solder

• Pipe Threading Tool

• Primer and Solvent Cement

• Paste Flux

• Pipe Joint Compound approved

approved for use on potable water-

• Emery Cloth

or Sandpaper

for use on potable water

THE PROPER ORDER TO INSTALL WATER TREATING EQUIPMENT

(Shows sequence of equipment only. Seldom, if ever, would all items be needed.)

•

Always place a Neutralizer UPSTREAM of an Iron Filter, etc., as shown.

* Place a Taste & Odor Filter UPSTREAM of a water softener on a chlorinated water supply

and DOWNSTREAM of a water softener on a non-chlorinated water supply.

FIG. 2

Questions? Call The Kenmore Water Line 1-800-426-9345