Hughes Satellite IP Modem R-BGAN - Manual (Page 37)

Security Code Enable: If this box is not checked, there is no prompt for a Security Code after you
invoke Control Pad. If this box is checked, a prompt displays for the Security Code entry each
time you run the Control Pad with a different SIM than the one that was in the Modem when the
Security Code was enabled. By default, the Security Code is not enabled.
Change Security Code: If the Security Code Enable box is checked, and you would like to enter
the Code for the first time or change an existing Code, click this option. You will be required to
enter the Old Code, the New Code, and the New Code again for confirmation. Apply or
Cancel the changes.
;
Notes
If you forget the security code you will not be able to use the
Satellite IP Modem with a different SIM.
When you enter the Security Code for the first time, no old
Security Code entry is required. Whenever you enter or
modify the Security Code, you must exit the Control Pad, exit
the Launch Pad, and turn the Satellite IP Modem off and
then on again so that the new settings can take effect.
H
OME
The Home screen displays summary status information about the Satellite IP Modem.
Home Screen
You can navigate among all the various Control Pad functions by selecting them from the menu
on the left side of the screen.
Signal Quality: Displayed on all Control Pad screens, this bar graph provides an indication of
satellite signal quality. To save power, this indication updates slowly over time. To ensure you
R-BGAN Satellite IP Modem User Manual 27