Motorised system – Humax IR-ACE M User Manual
Page 53
It is possible to use automatic search using the DiSEqC 1.2 motorised system.
1. Ensure that the position for the satellite you want to search for is correct (see Section 3 and 5
above).
2. In the Main menu, select the channel searching option and press the OK
(
)
button.
3. In the Service Searching menu, select the Alternative Antenna that you 3set for this satellite.
4. When you search new services, please refer to Automatic Search on page GB42.
5. When the search has ended, press the OK
(
)
button to store and view the services.
Now that you have stored all the satellite positions and searched for all the services you want, you
can use your receiver as normal. When you change to a service transmitted from a different
satellite, you will have to wait a few seconds to allow the motor to move into position to receive the
new service.
8. Automatic Search
Motorised System
GB52