Humax IR-ACE M - Manual (Page 11)

STB Connections
1. Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the STB and the
otherend to a RCA/Cinch socket on your TV.
If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the
RF OUT on STB and the other end to a RF input socket on your TV.
2. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
1. Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the STB and the
otherend to a RCA/Cinch socket on your TV.
2. If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the
RF OUT on STB and the other end to a RF input socket on your TV.
3. Connect one end of RF cable to the RF IN on the STB and the other end to a terrestrial
antenna connection or the socket for public antenna on the wall.
4. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
1. Connect an RCA/Cinch stereo cable from the AUDIO L,R sockets on the back of the STB
to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi-fi system.
There are several ways of connecting the STB to your existing Audio/TV system.
For best results, we recommend using one of the following set-ups:
TV only (with RCA / Cinch)
TV with Terrestrial antenna
With a Hi-fi System
GB10
Note : STB model IR-ACE shown;
connections are the same for
model IR-ACE.