Humax IR-ACE M - Manual (Page 37)

To move a service to another position in the service list, proceed as
follows:
1. Activate the Organise All Services menu via the Main menu.
2. Select the desired service in the service list using the
button.
The button can be used to page up/down the service list.
3. Press the GREEN button with the desired service selected.
The icon then appears beside of the service number.
4. Move the selected service to the desired position using the
button. The button can be used to move across a
page in the service list.
5. Press the OK ( ) or GREEN button to confirm,
otherwise press the EXIT ( ) button to cancel.
To lock the service in the service list, proceed as follows:
1. Activate the Organise All Services menu via the Main menu.
2. Select the desired service in the service list using the
button.
The button can be used to page up/down the service list.
3. Press the YELLOW button. The icon then appears at the end
of the service name. If the YELLOW button is pressed again,
the icon disappears.
4. Press the OK ( ) button to confirm.
Otherwise press the EXIT ( ) button to cancel.
To skip the service in zapping the service, proceed as follows:
1. Activate the Organise All Services menu via the Main menu.
2. Select the desired service in the service list using the
button.
The button can be used to page up/down the service list.
3. Press the BLUE button. The icon then appears at the end of
the service name. If BLUE button is pressed again, the icon
disappears.
4. Press the OK ( ) button to confirm
or press the EXIT ( ) button to cancel.
Main Menu Guide
GB36