Humax IR-ACE M - Manual (Page 18)

There are four service list types: All Service, Favourite Service,
Network Service and Alphabetical Order Service.
There is also a Configuration Service menu to change the
attributes of each service in the list.
In the service list, some buttons are used to switch the service list
type or select the service.
• buttons: Used to move the cursor up/down in the
service list.
• buttons: Used to move the cursor left/right in the
service list.
• RED button: Used to select the All type Service.
• GREEN button: Used to select the Favourite type Service.
• YELLOW button: Used to select the Network type Service.
• BLUE button: Used to select the Alphabetical Order Service.
To change the attributes of a service, proceed as follows:
1. Change to the service whose attributes are to be changed using
the , or other method.
2. Press the FAV ( ) button.
The Service Configuration Box then appears on the screen.
3. Use the buttons to select the desired one among the
attribute items (Favourite, Lock, Skip and Delete) in the Service
Configuration Box.
4. Use the buttons to enable/disable “LOCK”, “SKIP” or
“DELETE” to select the desired favourite group. When done,
press the OK ( ) button. To cancel, press the EXIT ( )
button.
The All Service list is a normal one, where the service list is
organised according to the order in which services are searched.
(The latest service will be added at the end of the service list.)
To select the “All Service” list, press the RED button with the
service list displayed.
If the RED button is pressed again in the All mode Service,
the service list toggles between Simple List and Advanced List.
Service List
Configuration Service
All Service
GB17