Humax IR-ACE M - Manual (Page 25)

Main Menu Guide
In the Parental Control menu, it is possible to change the Parental
Guidance Rating and the PIN code.
To set the Parental Guidance Rating, proceed as follows:
1. Activate the Parental Control menu via the Main menu.
(To activate it, the PIN code should be entered).
2. Select the Censorship classification item using the button.
3. Select the desired Parental Guidance Rating using the
button.
4. The Parental Guidance Rating is given as age-based numbers,
“no block”, “10”, “13”, “16”, “18” and “total block”.
5. Press the OK ( ) button to confirm the change.
** The default PIN code is .
To change the PIN code, proceed as follows:
1. Activate the Parental Control menu via the Main menu.
(To activate it, the PIN code should be entered).
2. Select the Old PIN code menu using the button.
3. Enter the Old PIN code using numeric buttons. When four digits
have been entered, the cursor will automatically be moved to the
New PIN code menu.
4. Enter the new PIN code in the New PIN code menu. When four
digits have been entered, the cursor will automatically be moved
to the Verify Changed PIN Code menu.
5. Enter the new PIN code again to verify it. If it is correct, then the
new PIN code will be saved. If incorrect, then the message
“PIN code mismatch” will be displayed.
The INSTALLATION menu supplies the following functions:
• Configuration of miscellaneous functions such as
Language Setting, Time Setting, etc.
• Organization of Service List
• Search for services
• Information on STB
2. Parental Control
0 0 0 0
GB24
3. Installation