Humax IR-ACE M - Manual (Page 5)

References
All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennae
to be connected to the STB simultaneously.
If you have two or more fixed antennae or LNBs, you can use a DiSEqC 1.0 switch.
1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A DiSEqC switch input
connector.
2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B DiSEqC switch in
put connector.
3. Do the same for the other LNBs.
4. Connect one end of a Coaxial cable to the RF DiSEqC switch output connector and the
other end to the LNB IN socket on the STB.
Please refer to page GB46.
You can connect either a single satellite antenna directly to the digital receiver or several
antennae via the converter box or multi-feed equipment LNB.
You can connect a further Sat-receiver (for example analogue) to the common antenna
equipment receiver that has satellite signals.
If you have another analogue or digital STB and you wish to use the same LNB, then you
can connect it via the loop via. Connect one end of a Coaxial cable to the LNB OUT
on the STB and connect the other end to the LNB IN on your second STB.
1. DiSEqC 1.0 Connection
2. DiSEqC 1.2 Connection
3. Connecting a Satellite antenna
4. Loop Via
GB4