Humax IR-ACE M - Manual (Page 15)

Function Guide
The detailed information on a service and its event is automatically
displayed at the bottom of the screen (I-Plate) whenever a service
changes. To obtain this information when watching a service, press
thei ( ) button. If you press the i ( ) button again while the
I-Plate is displayed, the I-Plate disappears.
The I-Plate is divided into a “service information” part and an “event
information” part.
The service information is situated on the left side of the I-Plate and
consists of the following items:
• Current Time, Dolby Digital Symbol if there is an available Dolby
service.
• Service name, Service Number, icon.
• Subtitle/Teletext/Scrambling symbol displayed according to the
service attributes.
• Progressive Signal Quality bar.
The event information is situated on the right side of the I-Plate and
consists of the following items:
• Event name and, duration time of the event.
• Description of the event, status of the reserved event.
There are two types of event information, present event
information and following event information.
If the following one is available, the icon is displayed.
To switch between the present and following ones, proceed as
follows,
1. Activate the I-Plate using the i ( ) button.
2. If the present event information is available, it is displayed on the
I-Plate.
3. If the following event information is available, the icon is
displayed.
4. Press the button to switch to the following event information.
5. Press the button to return to the present event information.
If the present one is not available, the icon is not displayed
and cannot return to from the following one.
Information Box (I-Plate)
Service Part
Event Part
GB14