Humax IR-ACE M - Manual (Page 43)

Main Menu Guide
The function of the Manual Search menu is to search services in
one transponder using information from a satellite transponder.
(If the Network Search option is enabled, services in other
transponders are searched).
The following items are supplied as parameters:
Specifies the antenna used for searching.
Sets the frequency of a transponder.
Sets the polarisation type (horizontal or vertical).
Sets the symbol rate of a transponder.
Sets the FEC value of a transponder.
Enables/disables the network search option. If the option is enabled,
all services in other transponders may be searched according to
information in the NIT.
Enables/disables the automatic skip option. If this option is enabled,
the scrambled services are skipped during the search.
Some operators define the order of services in a list using BAT.
If this option is enabled, the services will be ordered according to
the BAT information.
Manual Search
Antenna Alternative
Frequency
Polarisation
Symbol Rate
FEC(Forward Error Correction)
Network Search
Automatic Skip
BAT Search
GB42