Humax IR-ACE M - Manual (Page 31)

Main Menu Guide
To configure the NTSC mode on the TV, proceed as follows:
1. Activate the A/V Output Setting via the Main menu.
2. Select the NTSC Mode item using the button.
3. Select the desired NTSC Mode using the button.
4. Press the OK ( ) or EXIT ( ) button to confirm.
The UHF Tuning menu supplies the following functions:
• Set the UHF channel (CH28 ~ CH69).
• Set the PAL standard (PAL B, PAL G, PAL D, PAL K, PAL I).
• Set the frequency offset.
The Other Setting menu supplies the following functions:
• Set the level of OSD transparency. There are two levels:
opaque 50% transparent.
• Set the duration time of the Info. Box display. The duration time
can be set from 0 to 20 seconds.
• Set the Menu Mode, which changes the menu format according to
the video format (NTSC, PAL, Auto). If the TV supports only the
NTSC format, set the menu mode to NTSC. If the TV supports
only the PAL format, set the menu mode to PAL. If the menu mode
is set at Auto, the menu format is automatically changed
according to the format of the decoded video.
NTSC Mode
Other Setting
UHF Tuning
GB30