HP IPAQ RX3000 - Manual (Page 53)

49
How Do I Insert and Remove SD Cards
from Expansion Slot?
To install a Secure Digital (SD) card into the expansion slot on
the HP iPAQ:
1. Locate the slot on the top of the HP iPAQ.
2. Remove the protective plastic card.
3. Insert the expansion card into the expansion slot and push the
connection edge of the card firmly into the expansion slot.
Note: If your expansion card is not recognized, follow the card
manufacturer’s instructions to install it.
To remove a Secure Digital (SD) expansion card from the
expansion slot on the HP iPAQ:
1. Close all applications that are using the expansion card.
2. Remove a card from the Secure Digital expansion slot by
slightly pushing down on the card 1 to unlock it.
3. When the card disengages and pops up 2, pull it from the
expansion slot.